The Plugging of Wells form, the assignee shall plug all wells not capable or no longer capable of producing oil or gas in paying quantities and shall restore the lands around any such well in a manner that meets all requirements of any governmental agency having jurisdiction and the oil and gas lease on which the well is located.
Alabama Plugging of Wells
Category:
State:
Multi-State
Control #:
US-OG-503
Format:
Word;
Rich Text
Instant download
Description
How to fill out Plugging Of Wells?
Discovering the right authorized record web template might be a battle. Naturally, there are plenty of web templates available on the Internet, but how can you find the authorized type you will need? Make use of the US Legal Forms internet site. The services offers a large number of web templates, for example the Alabama Plugging of Wells, that you can use for enterprise and personal demands. All the varieties are inspected by pros and fulfill federal and state needs.
If you are currently authorized, log in in your bank account and click on the Acquire switch to get the Alabama Plugging of Wells. Make use of your bank account to appear throughout the authorized varieties you may have acquired earlier. Go to the My Forms tab of your bank account and have one more copy of the record you will need.
If you are a brand new customer of US Legal Forms, listed here are easy directions that you should follow:
- Very first, make certain you have chosen the proper type for your personal town/area. You may look over the shape utilizing the Review switch and look at the shape outline to make certain it will be the right one for you.
- When the type is not going to fulfill your preferences, use the Seach area to discover the correct type.
- Once you are sure that the shape would work, click on the Buy now switch to get the type.
- Opt for the rates strategy you need and enter in the needed information and facts. Create your bank account and purchase your order using your PayPal bank account or bank card.
- Choose the document format and down load the authorized record web template in your product.
- Complete, change and print out and indicator the attained Alabama Plugging of Wells.
US Legal Forms is definitely the greatest local library of authorized varieties that you can see numerous record web templates. Make use of the company to down load expertly-manufactured papers that follow state needs.
Form popularity
FAQ
A well is plugged by setting mechanical or cement plugs in the wellbore at specific intervals to prevent fluid flow. The plugging process usually requires a workover rig and cement pumped into the wellbore. The plugging process can take two days to a week, depending on the number of plugs to be set in the well.
When a well reaches the end of its lifetime, it must be permanently plugged and abandoned. Such plug and abandonment (P&A) operations usually consist of placing several cement plugs in the wellbore to isolate the reservoir and other fluid-bearing formations.
Well plugging involves the placement of cement at discrete depth intervals in a wellbore to seal off hydrocarbon-bearing zones and prevent the pollution of aquifers and surface waters.
Proper decommissioning requires the unneeded well be filled with chlorinated sand to the top of the water table, a bentonite (a type of clay) or grout plug be installed at that level with sand filling the remainder of the pipe with a second plug placed below grade.
When a well reaches the end of its lifetime, it must be permanently plugged and abandoned. Such plug and abandonment (P&A) operations usually consist of placing several cement plugs in the wellbore to isolate the reservoir and other fluid-bearing formations.
Fill the well with bentonite chips to a depth of 6 feet below the surface. Three feet of neat cement grout then should be added above the bentonite. The plug of neat cement grout over the bentonite will ensure that the bentonite will not dry out and lose its seal.
ABANDONMENT PROCEDURES FOR HAND DUG WELLS A dug well exceeding 24 inches in diameter shall be filled and sealed by placing fill material (excluding clay or silt) in the well to a level approximately 5 feet below ground level. II. A 3 foot plug of sealing material shall be placed above the fill.
All the debris and material need to be removed for successful plugging. Once the well is cleaned out, the plugging process begins by placing cement in the well through the gas and oil-producing zones. These cement plugs, at times, are spaced within the well using bentonite gel spacers (mixtures of clay and water).
