Cal Trac Bar Installation In Washington
Description
Form popularity
FAQ
And downwards. Position as a driver you notices most in a couple different ways the rear end willMoreAnd downwards. Position as a driver you notices most in a couple different ways the rear end will kind of walk around kind of feel loose. Especially. If you're towing something heavy.
In addition to improving consistent 60-foot times, Calvert Racing's patented CalTracs eliminate axle rotation AND improve traction, especially on hard acceleration.
By cleverly controlling the position of the rear axle, traction bars significantly reduce the bounce, keeping the rear suspension from excessive movement. This results in a smoother, safer, and more controlled ride, improving the driving experience substantially.
Calvert Racing, Inc.
We suggest a pinion angle to be between -2 to -4 degrees when used with CalTracs.
Traction bars are a must on any truck in all honesty. It allows the truck to shift a lot nicer, and keeps the rear end more stable. I'll never remove mine or run a truck without them. My truck needless to say is way more fun to drive and rides a hell of a lot better.
The pivot at the front leaf eyelet then forces the pin riding on top of the springs downward into the spring pack itself. This downward force of the pin on the leaf springs causes down force on the entire axle assembly and pushes your tires down onto the pavement/dirt.
CalTracs: Accept No Substitutes! Patented Traction Bar system with designs for axle above or below springs. Bolt on kits for nearly every leafspring application. Hooks your vehicle, especially on hard acceleration, even in the dirt! Improves consistency and 60-foot times.
Calvert notes that its split mono leaf springs are designed to control and reduce excessive body separation in rear suspension and they can plant the rear tires without unloading. They're also considerably lighter than factory leaf springs (especially multi-leaf designs).
