This form is used when Grantor grants and conveys to Grantee a Right of Way and Easement (the "Right of Way") on which to lay, repair, maintain, operate, and remove pipelines and replace existing lines with other lines for the transportation of oil or gas, and their products, water, or any other fluid or substance. Grantee shall have the right to install valves, fittings, meters, and similar appurtenances as may be necessary or convenient to the operation of the lines installed by Grantee, and to erect, repair, maintain, operate, patrol and remove electric lines, graphite and steel anodes, and other devices for the control of pipeline corrosion, over, through, on, under, and across the lands descibed within.
Arkansas Pipeline Right of Way With Grantee Selecting Course is a specific procedure that governs the process of selecting an appropriate course for pipelines across Arkansas. This process allows the grantee, the entity responsible for constructing or operating the pipeline, to choose the most suitable route for the pipeline to traverse the state. The Arkansas Pipeline Right of Way (ROW) refers to the designated land or area where the pipeline will be laid. This territory is secured through legal documentation, granting the grantee certain rights and privileges to construct, operate, and maintain the pipeline within this specified area. The ROW ensures that the pipeline is shielded from encroachments or any undesired obstructions. The course selection aspect of this process is crucial as it determines the exact path the pipeline will follow. Several factors come into play when determining the course, including environmental impact, safety considerations, the impact on existing infrastructure, land usage, and regulatory requirements. Grantees must carefully assess and balance these factors to arrive at the most suitable route for their pipeline. There are different types of Arkansas Pipeline Right of Way courses that grantees can choose from, depending on their specific project requirements: 1. Linear Route: This type of course follows a straight line from the starting point to the endpoint, allowing for the shortest route possible. It is frequently selected when minimal environmental impact is expected. 2. Curve Route: When avoiding certain obstacles or complying with spatial restrictions, a curved route is selected. This type of course deviates from a straight line to accommodate these constraints while still adhering to safety guidelines. 3. Cross-Country Route: In certain locations with minimal existing infrastructure or lower population density, a cross-country route might be chosen. This course typically avoids densely populated areas or environmentally sensitive locations and relies on the existing topography. 4. Parallel Route: Grantees may select a parallel route if they need to run their pipeline near an existing one. This option allows for efficient utilization of existing infrastructure and minimizes disturbance. 5. Access Road Route: In some cases, constructing an access road alongside the pipeline might be necessary to facilitate maintenance and emergency access. This course ensures that the pipeline is easily reachable for necessary operations. Overall, the Arkansas Pipeline Right of Way With Grantee Selecting Course is a critical process that allows grantees to determine the ideal path for their pipelines. Through careful evaluation of various factors and consideration of different route options, grantees can minimize environmental impact, ensure safety measures, and comply with regulatory requirements.
