Carta Settings In Phoenix
Description
Form popularity
FAQ
Device Not Turning On If you encounter this issue, the first step is to check if the battery is properly charged and inserted. A depleted battery could be the culprit behind the Carta 2 not powering on. If the battery is fine, the next step would be to perform a reset.
Screen. We recommend using the preset temperature. And time of 450 degrees Fahrenheit. For 30MoreScreen. We recommend using the preset temperature. And time of 450 degrees Fahrenheit. For 30 seconds.
UNLOCK by pressing the power button four times. Your FOCUS V CARTA 2 comes with five default SESH presets as well as a custom user setting. Press and hold the POWER (O) button to show the SESH preset screen. Press the UP (+) or DOWN (-) buttons to cycle between the preset configurations.
Customize Session Settings: Temperature: Click the (-) button to set a range between 365F and 635F. Our recommended temp setting is 450F. Session Time: Use the (+) button to set between 20 and 60 seconds. Our recommended time setting is 30 seconds. After setting your time and temp, you can load your concentrate.
You can check the charging status of your device by looking at the battery indicator on your base as well as on the LED panel of your wireless charger. You will see a solid green light indicating charging is occurring. Remove your device: Once your CARTA is fully charged, simply remove it from the charging pad.
Classic range from 500 to 800° F. Once you have found your desired preset double click twice toMoreClassic range from 500 to 800° F. Once you have found your desired preset double click twice to initiate a session.
Your FOCUS V CARTA 2 comes with five default SESH presets as well as a custom user setting. Press and hold the POWER (O) button to show the SESH preset screen. Press the UP (+) or DOWN (-) buttons to cycle between the preset configurations. Preset 0 will apply user settings.
Start the Session To adjust the temperature, press the down button and then lock in the setting by pressing the circle button. To adjust the session timer, press the up button and then lock in by pressing the down button. Press the circle button twice to start heating, and wait 30 seconds before taking a draw.
For instance, low-temperature settings around 315-450°F are ideal for terpene-rich extracts like live resin, while higher temperatures of 600-900°F work best for concentrates with a higher melting point, such as shatter.
