Boundary Lines For My Property Nz In Riverside
Description
Form popularity
FAQ
"right line boundary" , of land, means a boundary of the land to which all of the following apply— (a) the boundary is represented, or, having regard to the source material for the land, would be represented, on a plan of survey for the land as a straight line or series of straight lines; (b) the boundary's location is ...
However, the definitive description of your boundary is on the legal title for your property. There is usually at least one diagram on your title which will have the set measurements of all of your boundaries' locations. On the ground, there should be markers along your boundary.
Hire a licensed land surveyor The most accurate way to know where your land begins and ends is to hire a surveyor to determine your property lines. The property surveyor will first check county records to understand the history of the lot.
Online aerial maps (like those available on some council websites) give you a starting point. However, the definitive description of your boundary is on the legal title for your property. There is usually at least one diagram on your title which will have the set measurements of all of your boundaries' locations.
A boundary mark is commonly a large wooden peg, chamfered at the top and painted white, or an alloy or stainless-steel disk marked “boundary mark” and anchored into a fence post or into the concrete.
How close can I build to my boundary? ZoneMinimum Building Setback from Boundary Rural Production All boundaries - 8 metres Rural Lifestyle Road boundary – 10 metres Other boundaries – 3 metres Settlement - Centre Road Boundary – 2 metres Boundary to a site with a residential unit – 3 metres8 more rows
You cannot build a house (or other structure) closer than 2 metres to a boundary that you share with a neighbour. Height (building) recession plane: Recession planes are lines that proceed at an angle from the horizontal, measured from any point 2.5 metres vertically above ground level along site boundaries.
If the deck is at first-floor level or above, it must be set back at least 4m from internal boundaries in most Residential zones. In all zones, a larger front yard setback is required which varies depending on the zone.