Bulk Transfers For Shirts In Fairfax
Description
Form popularity
FAQ
You should use plastisol inks of any color and add a puff additive such as “Rutland NPT puff' which recommends a 5% to 15% ratio for an optimum puff. The amount of additive dictates how much the ink will rise.
Goof Proof Numbers Materials: applies to cotton, polyester, cotton/poly blends. Pre-Press: 3-5 seconds to remove moisture from the garment. Time: 3-5 seconds. Temperature: 360 - 370°F. Pressure: Medium 6-8 (60-80 psi) Peel: Hot (peel immediately)
As mentioned previously, we know that the 3D effect of puff screen printing comes from the combination of standard plastisol ink with a puff additive.
Puff Application Instructions Set temperature at 360-385 degrees Fahrenheit. Place sweatshirt on top of bottom pad for added pressure. Set pressure at medium. Print 6 to 8 seconds. Peel immediately while hot. Pull transfer paper from side to side or top to bottom in one, even sweeping motion.
Puff Application Instructions Set temperature at 360-385 degrees Fahrenheit. Place sweatshirt on top of bottom pad for added pressure. Set pressure at medium. Print 6 to 8 seconds. Peel immediately while hot. Pull transfer paper from side to side or top to bottom in one, even sweeping motion.
Out. Now after we apply the vinyl we're going to go ahead and press it for 15 seconds. At 320° it'sMoreOut. Now after we apply the vinyl we're going to go ahead and press it for 15 seconds. At 320° it's so satisfying to watch this vinyl just puff. Up. And there you go guys just check out that. Quality.
Four fingers down. We're lining up the center line that we made in our transfer with the center.MoreFour fingers down. We're lining up the center line that we made in our transfer with the center. Line on the press. That piece of tape. This line nice and straight four fingers.
Common Transfer Sizes Position the print 3″ down from the collar for maximum impact. Pro tip: Balance the design with a left chest print on the front for a coordinated look. The right size for DTF transfers on shirts is quite important for achieving high quality.
Average t-shirt profit margins High-quality designs let you get away with higher profit margins, while focusing on a very saturated niche might require lowering them. There is no specific baseline for the perfect t-shirt business profit margin. Average custom t-shirt industry markups tend to fall between 30% to 50%.
A quick and easy way to remember in ordering bulk shirts is through a simple ratio based on a total of 10. Simply divide the total number of shirts you're ordering to 10 (total ratio) and multiply the product by each sizing. For example, if you need 100 shirts, multiply each by 10.
