True Correct Copy With Base Point In Nassau
Description
Form popularity
FAQ
Move or set the base point closer to the geometry: Select the block in the drawing. Choose "Block Editor" from context menu or type BE (BEDIT (Command)) and press Enter. Select the block from the list, the previously selected block will be highlighted, and press OK. In the palette, select the Parameter, Base.
Copy and Paste with Base Point Press Ctrl+Shift+C or enter COPYBASE at the command prompt. Select the base point. Select the objects to copy and press Enter. The objects are now available to be pasted into the same drawing or another drawing.
Select an object, click the Dup/Mult tool, the next click is the first reference point, subsequent clicks will create duplicates of the object based on the reference point.
CopyBase command bar: copybase. shortcut: Ctrl+Shift+C. menu bar: Edit | Copy with Base Point. : copybase. Select base point: (Pick a point, or enter x,y coordinates.) Select entities to copy to the clipboard: (Choose one or more entities.)
The Copy with Base Point command is selected from the Edit menu (Edit Copy with Base Point) or by selecting the Copy with Base Point Icon under the Copy Icon from the Edit toolbar or by typing COPYCLIPBP into the program.
Copy and Paste with Base Point Select the base point. Select the objects to copy and press Enter. The objects are now available to be pasted into the same drawing or another drawing. If necessary, switch to the drawing where you want to paste the objects.
Key after press the keys. Three and one this will set you in copy mode. So select the Point selectMoreKey after press the keys. Three and one this will set you in copy mode. So select the Point select the objects. Click after you will be set in paste method.
The Copy with Base Point command is selected from the Edit menu (Edit Copy with Base Point) or by selecting the Copy with Base Point Icon under the Copy Icon from the Edit toolbar or by typing COPYCLIPBP into the program.
Select the objects you wish to copy, and then right-click or press the Enter key to apply. Next you are prompted to select a base point. The point selected will be the reference point used when the part is pasted back and will be positioned relative to the base point selected in the drawing.
