This form is a sample letter in Word format covering the subject matter of the title of the form.
Cal Trac Bar Installation In Suffolk
Category:
State:
Multi-State
County:
Suffolk
Control #:
US-0001LTR
Format:
Word;
Rich Text
Instant download
Description
Form popularity
FAQ
Traction bars are a must on any truck in all honesty. It allows the truck to shift a lot nicer, and keeps the rear end more stable. I'll never remove mine or run a truck without them. My truck needless to say is way more fun to drive and rides a hell of a lot better.
Calvert Racing, Inc.
In addition to improving consistent 60-foot times, Calvert Racing's patented CalTracs eliminate axle rotation AND improve traction, especially on hard acceleration.
By cleverly controlling the position of the rear axle, traction bars significantly reduce the bounce, keeping the rear suspension from excessive movement. This results in a smoother, safer, and more controlled ride, improving the driving experience substantially.
And downwards. Position as a driver you notices most in a couple different ways the rear end willMoreAnd downwards. Position as a driver you notices most in a couple different ways the rear end will kind of walk around kind of feel loose. Especially. If you're towing something heavy.
The pivot at the front leaf eyelet then forces the pin riding on top of the springs downward into the spring pack itself. This downward force of the pin on the leaf springs causes down force on the entire axle assembly and pushes your tires down onto the pavement/dirt.
We suggest a pinion angle to be between -2 to -4 degrees when used with CalTracs.
The traction bars do really have a positive impact on your traction. The reduction in 60 ft. times is real. However...it takes a little getting used in tight corners, pulling in to parking spots, in and out garages, sharp turns, etc.
CalTracs: Accept No Substitutes! Patented Traction Bar system with designs for axle above or below springs. Bolt on kits for nearly every leafspring application. Hooks your vehicle, especially on hard acceleration, even in the dirt! Improves consistency and 60-foot times.
Calvert Racing, Inc.
More info
Place two jack stands below the axle tubes for support. When adjusting your CalTracs, be sure to have the suspension in a compressed state.Park truck on a flat work area, chocking the front tires is advised to avoid rolling. I'm gonna show you how to do it without needing any specialty tools so you're not going to need a hydraulic press or any kind of especially. CALTRACS INSTALL GUIDE - STANDARD. I would like to look at some installation instructions prior to ordering, but can't find anything online.
