This form is a sample letter in Word format covering the subject matter of the title of the form.
Cal Trac Bar Installation In King
Category:
State:
Multi-State
County:
King
Control #:
US-0001LTR
Format:
Word;
Rich Text
Instant download
Description
Form popularity
FAQ
``Traction bars'' are generally helpful in keeping the front control arms from pulling forward under immense acceleration. They can be used on street cars because you can leave your compliant control arm bushings, and use the 3rd pivot of the traction bar to limit the forward movement.
In addition to improving consistent 60-foot times, Calvert Racing's patented CalTracs eliminate axle rotation AND improve traction, especially on hard acceleration.
Bolt-On Traction: Installing Traction Bars Thread nuts onto the J-bolts and trial fit them to the axlehousing. Attach the traction bar to the differential housing. the rubber snubber and lift the differential housing until the weight of the car is on the leaf springs.
The harder you're on the throttle, the harder the downward force on your tires. While many believe that CalTracs are strictly for drag racing applications, a properly adjusted CalTracs setup could improve traction for just about any application, including heavy towing, off-roading, even daily driving.
Simply put, traction bars are installed on a lifted truck to help maintain its stability, prevent wheel hop, and keep your ride smooth no matter how bumpy the road gets. Axles, tires, suspensions, and trucks might seem a bit heavy for a casual read, or not if you are like us.
We suggest a pinion angle to be between -2 to -4 degrees when used with CalTracs.
If you spin your tires or get a hopping or chatter feeling from your rear end while towing heavy loads, you are likely feeling the effects of axle wrap and lack of traction. CalTracs were designed to help eliminate both axle wrap and traction issues. Click the link for more information.
The traction bar jumps up so this part here jumps up and hits the leaf spring which prevents wheelMoreThe traction bar jumps up so this part here jumps up and hits the leaf spring which prevents wheel hop. Because what it does is it forces all of the torque from your tires to the ground.
By cleverly controlling the position of the rear axle, traction bars significantly reduce the bounce, keeping the rear suspension from excessive movement. This results in a smoother, safer, and more controlled ride, improving the driving experience substantially.
More info
Place two jack stands below the axle tubes for support. Adjust bars equally side to side.Tighten jam nuts on front and rear portion of adjustment links. CalTracs traction bars traction enhancement system. Calvert Racing - 42156 10th Street West - Suite V - Lancaster, CA 935364 Phone: 1- Park truck on a flat work area, chocking the front tires is advised to avoid rolling. With Caltracs installed, reinstall the rear tires and lower the car to the ground. The RAS roadmaster active suspension. After some research I came to the conclusion that the caltrac bars would best suit my needs, just not my budget. Video showing install of Calvert Racing traction bars and hood stack!
