Bail For Pendant In Travis
Description
Form popularity
FAQ
The bail is normally placed in the center of the necklace where the pendant hangs. Some bails are made so a pendant can be attached after the necklace production is completed.
The only technical part of all pendants is the bail. The bail is the part of metal that the chain feeds through. There are many different types, but can be broken down into four distinct categories: tube bails, clip-on bails, fixed bails and hidden bails.
Almost like a handheld vise. Use a fine file to true up the sides to perfect alignment. After thatMoreAlmost like a handheld vise. Use a fine file to true up the sides to perfect alignment. After that use a sanding stick to remove the file mark now your bail is ready to solder onto your pendant.
And there are a couple of little picks on the inside here. And you just take your element. Say youMoreAnd there are a couple of little picks on the inside here. And you just take your element. Say you want to make this agate into a finished piece a pendant.
And a bail is a loop on a pendant that allows it to be attached to a chain it is what the chain orMoreAnd a bail is a loop on a pendant that allows it to be attached to a chain it is what the chain or the string. Goes through. And there's some controversy.
On so all you do is open that up and put the necklace. In and snap it back closed. And you don't seeMoreOn so all you do is open that up and put the necklace. In and snap it back closed. And you don't see any of that from the front.
Goes through. And there's some controversy. With a bail I didn't realize this I usually spell bailMoreGoes through. And there's some controversy. With a bail I didn't realize this I usually spell bail v-a-l-e. But some people say no it has to be BA IL. Because b al e is always a hunk of hay.
So all you're going to do is very gently. Use your fingers. If you use pliers you might ding up theMoreSo all you're going to do is very gently. Use your fingers. If you use pliers you might ding up the metal. And it's really not necessary it's pretty easy to. Open just gently pull. It.
Use lots of pressure. And you just want it to swing freely. And then you've got a finished pendant.MoreUse lots of pressure. And you just want it to swing freely. And then you've got a finished pendant. Here are a few other types of ice pick bails here's a folding. One.
