Building and trade permits are required for interior alteration, including but not limited to kitchen and bath remodeling, wall or partition removal, alteration or installation. When an alteration/renovation permit does not involve structural changes, it may be processed through our walk-through program.
Compliance with a notice of violation notwithstanding, the building official may request legal proceedings be instituted for prosecution when a person, firm or corporation is served with three or more notices of violation within one calendar year for failure to obtain a required construction permit prior to ...
On a single-family house, most routine work does not require a permit. You can: Paint, add or replace carpet, tile or hardwood floors, replace cabinets, and even replace paneling and drywall without a permit. Replace your windows and doors, as long as you don't change the size of the opening in the wall.
The quick and simple answer is: you usually don't need a permit if the shed is 120 square feet or less. In California, most jurisdictions have adopted the 120 square foot rule. If your shed area is larger than 120 square feet, it needs a building permit. If it's less than that, it doesn't.
Permits are required for the construction of a new building, shed, deck, additions, or renovations to existing structures.
Detached accessory structures used as tool and storage sheds, playhouses or similar uses, provided the floor area does not exceed 256 square feet and is not more than one story, (under 18” floor height, under 10' eave height above grade.)
A building permit is required for all new residential, commercial, and industrial construction – including alterations and equipment installations in Fairfax County.
Compliance with a notice of violation notwithstanding, the building official may request legal proceedings be instituted for prosecution when a person, firm or corporation is served with three or more notices of violation within one calendar year for failure to obtain a required construction permit prior to ...