Bulk Transfer In Usb In Philadelphia
Description
Form popularity
FAQ
Each USB transfer is one packet, which can be up to 64 bytes if using bulk type. If you want to send more than 64 bytes, you have to use multiple packets.
Bulk Transfers are used for data which are not of the type Control, Interrupt, or Isochronous. Reliable exchange of data is ensured at the hardware level using error detection. Data are transferred in the same manner as in Interrupt Transfers, but have no defined polling rate.
Maximum packet size of a bulk endpoint depends on the bus speed of the device. For full speed, high speed, and SuperSpeed; the maximum packet sizes are 64, 512, and 1024 bytes respectively.
If you are using a regular cable (max length of 5 meters for 2.0 and max length of 3 meters for 3.0/3.1) with an active cable, then the maximum length for USB 2.0 is 25 meters (about 82 feet) and the maximum recommended length for USB 3.0/3.1 is 15 meters (about 49 feet).
The maximum packet length for full-speed USB communication is 64 bytes. So the data will be transferred in chunks of 64 bytes and needs to be reassembled on the other end. USB CDC is based on bulk transfer endpoints and implements a data stream (also known as pipe), not a message stream.
Maximum packet size of a bulk endpoint depends on the bus speed of the device. For full speed, high speed, and SuperSpeed; the maximum packet sizes are 64, 512, and 1024 bytes respectively.
USB 2.0 transfers data at a top speed of 480 megabits per second (Mbps), while USB 3.0 can transfer data at up to 5 gigabits per second (Gbps). You can identify USB 3.0 connectors by their blue colour and initials SS, which stand for 'SuperSpeed'.
There are various FAT formats as well, including FAT/FAT16 (max volume size 4GB, max file size 2GB), and FAT32 (max volume size 2TB, max file size 4GB).
Bulk Transfers. Bulk Transfers are used for data which are not of the type Control, Interrupt, or Isochronous. Reliable exchange of data is ensured at the hardware level using error detection. Data are transferred in the same manner as in Interrupt Transfers, but have no defined polling rate.
