Prepare Quantity Pdf For Free

Thumb Rule of Quantities of Material for 1000 sq. ft. Cement = 400 bags. Sand = 51 Cubic meter or 81,600 kg. ... Aggregate = 38 Cubic meter or 60,800 kg. ... Steel = 4 kg/sq. ft. = 4000 kg/1000 sq. ft. Paint = 180 lt. Bricks = 8 Bricks/sq. ft. = 8000 Bricks/1000 sq. ft. Flooring = 1300 sq.

To estimate the quantity of materials required for concrete works, the first step is to calculate the volume of concrete required for the job. For instance, for a (230 x 230)mm column in a duplex, the volume of concrete required is 0.16 m3 (i.e 0.23 m × 0.23 m × 3m = 0.16 m3) assuming that the storey height is 3 m.

What is Material Quantity (MQ) ? Material Quantity or MQ is the list of individual quality of the material of each item of work mention in the bill of quantity. It is very essential and needed later before ordering the construction materials (i.e.- cement, sand, aggregate, brick, reinforcement steel, etc.).

A standard Bill of Quantities (BOQ) typically includes the following key elements: Detailed description of works and materials: A BOQ should provide a clear and detailed description of the work to be carried out, including the type, quality, and quantity of materials required.

Use the spreadsheet to list materials you'll need to complete your project. Item number (could be a serial number or part number) Description. Unit of measurement. Quantity. Rate per unit (to be filled in by contractors bidding on the project) Total cost of material (to be filled in by contractors bidding on the project)

Figure out the cubic yards or square footage by multiplying the length, width and height. You can use this information to help figure out how much concrete you need, for example. Once you know the specific dimensions, you can start to calculate the things you need for framing.

The basic formula to calculate construction cost per square feet is: Cost of construction = area of plot x construction rate per sq ft.

The traditional method of preparing bills of quantities starts with taking of quantities from drawings. This is followed by squaring the dimensions and transferring the resultant values to an abstract paper. The quantities in the abstract are grouped and converted to the relevant billing units.