Bulk Transfers For Shirts In Allegheny
Description
Form popularity
FAQ
3. Go two sizes up from your usual size - Stylists recommend buying a shirt two sizes larger than your typical size while shopping for oversized apparel. Your shirt should fit loosely over your waist and shoulders and be a few inches longer than a standard shirt.
If printing on adult size shirts, the standard size is 11” x 11” (or 11” wide by proportionate height). This will look good on almost any adult size. For printing on youth sizes, a good design size is about 9” x 9”.
Common size breakdown So for example, to place the best order if you need 100 t-shirts, you'd select 10 Smalls, 25 Mediums, 30 Larges, 25 XLs, and 10 2XLs. Depending on the shirt style and audience, you may want to add a few 3XL and 4XLs too.
A quick and easy way to remember in ordering bulk shirts is through a simple ratio based on a total of 10. Simply divide the total number of shirts you're ordering to 10 (total ratio) and multiply the product by each sizing. For example, if you need 100 shirts, multiply each by 10.
Temperature: For 100% polyester & synthetics: 290-320°F. For cotton, cotton/poly blends: 340-360°F.
APPLICATION INSTRUCTIONS FOR SCREEN PRINTED TRANSFERS Pre-heat Heat Press to 325 degrees. Pre-press garment for 10 seconds to release moisture. Place screen printed side of transfer face down and on top of garment. DO NOT COVER WITH TEFLON. Press with Medium/High Pressure for 7 Seconds. Peel HOT.
Four fingers down. We're lining up the center line that we made in our transfer with the center.MoreFour fingers down. We're lining up the center line that we made in our transfer with the center. Line on the press. That piece of tape. This line nice and straight four fingers.
Transfer. Take the iron. And place it down on your design for 12 seconds. Repeat if needed acrossMoreTransfer. Take the iron. And place it down on your design for 12 seconds. Repeat if needed across your transfer to make sure you've covered the entire. Design you don't want any loose corners peeling.
Heat Set Fabric Ink: Heat Press HOW TO: Make sure your screen printing ink is completely dry. Adjust the temperature of your heat press to 320°F (160°C) and press your project for 40 seconds.
It is important to know that our heat press instructions recommend pressing at 325 degrees for 7 seconds. This is a guideline and a starting point.
