Get CA FL-312 2003

So indeed, FL300 means 30,000 ft. Altitude 18000 means that the altimeter indicates 18,000 feet and that the altimeter is set to the QNH, which is the pressure reading on the ground corrected to sea level pressure using the standard atmosphere.

A flight level is simply the level above Transition altitude, with the last two zeros chopped off. FL55 - 5500ft (pronounced Flight Level Five Five) FL100 - 10,000ft (Pronounced Flight Level one hundred)

FL180 and FL300 stand for Flight Level 180 and Fight Level 300. Flight levels are spaced 100ft apart on an altimeter that is set to the standard sea level pressure (QNE) of 1013.25 hectopascals or 29.92 inches of Mercury. So indeed, FL300 means 30,000 ft.

it means to expect to climb to any altitude starting at 18,000 all the way up to 60,000. Any of the altitudes in those areas are Flight level 230 for 23,000 feet etc.

The lowest usable flight level is determined by the atmospheric pressure in the area of operation, as shown in TBL ENR 1.7-1.

The altitude at or below which the vertical position of an aircraft is controlled by reference to altitudes. Transition Level. The lowest flight level available for use above the transition altitude. Transition Layer. The airspace between the transition altitude and the transition level.

Unnecessary confusion. If ATC says "expedite your climb to FL190" they mean "please hurry up and climb to FL190". They don't care whether you do it by opening the throttle, raising the nose, or divine intervention.

In aviation, AGL and MSL represent acronyms used for elevation measurements by pilots and air traffic controllers. AGL stands for above ground level, while MSL refers to mean sea level. Pilots use these measurements at different times during the course of a flight.

In aviation, AGL and MSL represent acronyms used for elevation measurements by pilots and air traffic controllers. AGL stands for above ground level, while MSL refers to mean sea level. Pilots use these measurements at different times during the course of a flight.

As Scott said, AGL means Above Ground Level, while MSL is Mean Sea Level, meaning the altitude above sea level. Altimeters are generally referenced to sea level because the ground level keeps changing as you move.

Sectional charts normally show both mean sea level (MSL) and above ground level (AGL) heights for towers. Next to the tower, you'll see two numbers. The top number is the height in MSL and the bottom number in parentheses is the height of the tower in AGL.

In aviation, atmospheric sciences and broadcasting, a height above ground level (AGL) is a height measured with respect to the underlying ground surface. This is as opposed to altitude/elevation above mean sea level (AMSL), or (in broadcast engineering) height above average terrain (HAAT).

Order to Show Cause Request for Orders. A Request for Order (RFO) formerly called an Order to Show Cause, or OSC, is a request by a party for the court clerk to set a hearing so the judge assigned to the case can make certain orders. ... A hearing will then follow.

A request for order hearing is a hearing that has been requested by one of the parties on a specific issue that the judge will decide in court that day at the hearing. If the other party filed the request, you should have been served with the paperwork (in...

Hearings can determine temporary, agreed, or some procedural matters. The trial is where both parties present evidence and arguments for the judge to use in making a final decision. The court generally does not allow witnesses until the trial. At hearings, the court relies on written declarations and your arguments.