Get Pantex Px-5879

Filling out the Pantex PX-5879 online is a crucial process for documenting weld inspections. This guide provides a step-by-step approach to ensure that you complete the form accurately and effectively.

Follow the steps to complete the Pantex PX-5879 form seamlessly.

1. Press the ‘Get Form’ button to obtain the form and open it for editing.
2. In block 1, enter the drawing, piece, part, or copy number associated with the inspection.
3. In block 2, input the Work Order or Job number relevant to the inspection.
4. In block 3, specify the date of inspection. If multiple dates are necessary, list all required dates.
5. In block 4, identify the acceptance criteria by entering the code under which the inspection was conducted. For multiple codes, indicate which code applies to each joint in blocks 11 or 18.
6. In block 5, input the Welding Procedure Specification (WPS) number. If more than one WPS applies, specify which WPS is relevant for each joint in blocks 11 or 18.
7. In block 6, identify the type, grade, or group number of the base material, ensuring it is traceable to the weld joint.
8. In block 7, enter the name of the company conducting the inspection.
9. In block 8, all welders who performed welds on the product must provide their signatures.
10. In block 9, enter the base material heat number, ensuring it is traceable to the weld joint.
11. In block 10, specify the filler material heat or lot number, also ensuring traceability to the weld joint. If not applicable, indicate 'NA.'
12. In block 11, identify each welded joint by listing piece numbers, views, sheets, etc. If additional space is needed, duplicate page 1.
13. In block 12, provide the welder’s unique identification symbol for each weld joint.
14. In block 13, check this block if conducting an initial joint inspection (thickness, joint preparation, etc.).
15. In block 14, check if the welding equipment parameters have been verified to match the WPS.
16. In block 15, confirm if the welder's qualifications have been verified prior to welding.
17. In block 16, check if the work area has been maintained free of clutter to prevent contamination.
18. In blocks 17a to 17l, check attributes that apply based on inspection criteria. An 'X' indicates rejection for specific reasons, which may require repairs in accordance with code requirements.
19. Finally, provide any additional comments in block 18 if clarification is needed.
20. In block 19, the inspector must enter their name, date, and qualification.
21. Once completed, you can save changes, download, print, or share the form as needed.

Complete your Pantex PX-5879 form online today for timely processing.