Get Raptor Set Up Tools

This guide provides step-by-step instructions for effectively filling out the Raptor Set Up Tools form online. Following this guide will help ensure accurate completion and facilitate a smooth sharpening process.

Follow the steps to successfully complete the Raptor Set Up Tools form online:

1. Press the ‘Get Form’ button to acquire the Raptor Set Up Tools form and open it in the designated editor.
2. Review the introductory section of the form to understand the purpose of the Raptor Setup Tools and how they simplify the sharpening process.
3. Fill in the required details regarding the tool to be sharpened by following the indicated measurements for tool protrusion—2 inches for standard jigs and 1.75 inches for 6 inch grinders.
4. Provide the leg angle required for the tool holder; set it to 23 degrees for most applications, ensuring that the adjustment aligns with the specified measurements.
5. In the section describing the use of the Raptor Setup Tool, follow the instructions to adjust the support arm until both contact points align with the wheel face.
6. Record any additional information requested about the desired bevel angles, referring to the recommended angles provided in the tool documentation.
7. Finally, review all entered information for accuracy, then save your changes, download, or print the completed form for your records.

Complete your Raptor Set Up Tools form online today to enhance your sharpening experience.