Follow the steps to complete the WA System Test Report online.

1. Press the ‘Get Form’ button to access the form and open it in your preferred editor.
2. Fill in the occupancy information. Enter the occupancy name, contact name, occupancy address, contact phone, and contact email in the designated fields.
3. Provide the inspection and testing agency information. Input the agency name, phone number, address, emergency phone, and email.
4. Enter the inspector or tester information. Write down the name, phone number, and SFD certification number in the specified fields.
5. For the standpipe section, indicate the date of the test and choose the type of test that was performed (confidence test or reacceptance test), marking the appropriate checkbox.
6. Complete the checklist items under the pre-test checks by indicating whether each item is satisfied with a ‘Yes’ or ‘No’.
7. Fill out the testing and inspection checklist by responding to each test item with a ‘Yes,’ ‘No,’ or relevant note where applicable.
8. For the monitoring section, confirm if a signal was received at the Central Station monitoring company by marking the respective checkbox.
9. Conclude by indicating the results of the final checks and whether the standpipe was left in service.
10. Optionally, add the signatures of the technician and building representative if required, then review the completed report.
11. Once all fields are filled out and the report is reviewed, you can save the changes, download, print, or share the completed form as needed.

Complete your WA System Test Report online today for efficient and proper documentation.