Get Technical Note No. 0210 Rev. 2.1 Nucleocounter Nc-200

This guide provides users with a clear, structured approach to filling out the Technical Note No. 0210 Rev. 2.1 for NucleoCounter NC-200 online. By following the detailed steps outlined below, you will effectively complete the form to ensure proper performance qualification.

Follow the steps to complete the Technical Note No. 0210 Rev. 2.1 NucleoCounter NC-200.

1. Begin by pressing the 'Get Form' button to access the form and open it in your preferred online editor.
2. In the first section, provide the instrument type by selecting NucleoCounter® NC-200™ and entering the corresponding catalog number.
3. Input the instrument serial number and the firmware version for accurate identification of the device.
4. Record the software version along with details for the NC-200 PQ Kit, including its catalog number, expiry date, and lot number.
5. For the zero count procedure, select the protocol from the options presented, execute the steps, and record whether the result is successful.
6. Proceed to the bead count procedure, ensuring to follow the preparation steps for beads carefully to avoid procedural variations.
7. Fill in the results for low, medium, and high bead counts in the form, calculating the average and CV% where required.
8. Complete the summary section by indicating whether each procedure was successful, using 'OK/Yes' or 'Fail/No' options where prompted.
9. Lastly, provide the necessary signatures along with the date and your name in the performed by and verified by sections.

Complete your documents online today to ensure accurate record-keeping and compliance.