Get Pa Bfsls 515a 2013-2025

Filling out the PA BFSLS 515a form is essential for maintaining accurate thermometer accuracy records in laboratories. This guide provides clear, step-by-step instructions to help users complete the form efficiently and accurately.

Follow the steps to successfully complete the form

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Enter the facility or laboratory name in the designated field. Ensure that the name is spelled correctly, as this identifies your establishment.
3. Fill in the year at the top of the form in the provided space, specifying the year during which the thermometer accuracy checks are conducted.
4. For each thermometer check, document the date when the thermometer was tested in the 'Date Tested' column. You can list up to six test dates.
5. Provide the NIST reference thermometer’s serial or identification number. This ensures traceability and verification of the calibration standards used.
6. Indicate the location where the thermometer is used within your facility. This information is important for ensuring the accuracy of thermometer readings in different environments.
7. Record the range of the test thermometer and its graduation interval. This data helps in understanding the precision and applicability of the thermometer.
8. Input the temperature range of use in degrees Celsius. Ensure that this reflects the conditions under which the thermometer will operate.
9. Next, enter the temperature reading of the test thermometer in degrees Celsius at the time of testing.
10. Document the calibration points that were tested. This reflects the points at which accuracy was verified.
11. Record the temperature readings obtained from the NIST reference thermometer in degrees Celsius, noting any discrepancies.
12. Note the ice point result to verify the consistency and effectiveness of thermometer calibration.
13. Adjust the NIST reading recorded earlier if necessary and input the adjusted reading in degrees Celsius.
14. Calculate the correction factor for both the NIST and test thermometer, making sure to document these values.
15. Finish by entering the analyst ID for each check, ensuring that all entries are correct and complete.
16. Once all fields are filled out accurately, save your changes. You can download, print, or share the completed form as needed.

Complete and submit your PA BFSLS 515a form online today to ensure compliance and accuracy.