Get DOT FAA 8310-3 2017-2023

A Certificate of Conformity or statement of conformity provides evidence that a part was produced by a manufacturer holding an FAA-approved manufacturing process. Both attest to an articles conformity but the FAA Form 8130-3 can be used for multiple purposes. Return to Aircraft Records Questions.

FAA Form 8110-3 is titled "STATEMENT OF COMPLIANCE WITH THE FEDERAL AVIATION REGULATIONS" and is used to approved or recommend for approval the data used in making alterations or repairs to aviation products or articles. Only FAA designees are allowed to issue this form.

» Form 8100 9 is a document to be issued when an ODA approves or recommends approving the repair design that conforms to the FAR criteria. » With regard to the scope of ODA's approval, the category (structural, power plant, radio, etc.) and the content of the certificate (static analysis, safety analysis, etc.)

An 8130-3 form is a document required by the FAA under the Code of Federal Regulations (CFR) to certify an aircraft part or product is in acceptable condition for safe operation within the United States or one of its global partners in aircraft accountability.

Both the format above are used to approve major repair. The difference is that the 8110-3 to be used by FAA approved DER and the ODA delegated organizations to use 8100-9. Boeing has ODA delegation, this is the reason why they use 8100-9 otherwise called Repair Development Record (RDR) to approve repairs.

» The CoC must be completed by the FAA or a designee while the form 8130-3 can be completed by one of many FAA-authorized Certified Repair Station (CRS) or air carriers. Note - The 8130-3 is a more established standard compared to the CoC. The 8130-3, for example, can be used for export approval but the CoC cannot.

An 8130-3 form is a document required by the FAA under the Code of Federal Regulations (CFR) to certify an aircraft part or product is in acceptable condition for safe operation within the United States or one of its global partners in aircraft accountability.

- A Designated Airworthiness Representative for Manufacturing (DAR-F) may issue FAA Form 8130-3 for domestic shipments. - An Organization Designation Authorization (ODA) unit may issue FAA Form 8130-3 for products and articles produced by the ODA holder.