Get Liebert Datamate

This guide provides a step-by-step approach to filling out the Liebert Datamate online form. By following these instructions, you will ensure that all necessary information is accurately recorded to establish your equipment warranty.

Follow the steps to successfully complete the Liebert Datamate form.

1. Click ‘Get Form’ button to obtain the Liebert Datamate form, opening it in the designated editor.
2. Fill in the installer information, including their name and address. Ensure that all details are accurate as this information is critical for warranty processing.
3. Provide the owner's name and address in the corresponding sections. This helps to establish ownership of the equipment.
4. Include the owner's email address. This facilitates future communication regarding the warranty.
5. Enter the installation date of the unit. This date is important for warranty timelines.
6. Indicate whether the unit was received in good condition by selecting yes or no. If the answer is no, ensure to check that the carrier has been notified.
7. Confirm if the manuals have been kept with the unit by selecting yes or no.
8. In the Pre-Start-Up section, record the DataMate Serial Number and Model Number, along with the Serial and Model Numbers for the condenser or dry cooler and compressor.
9. Carefully check and document all the electrical connections, piping setup, and any other required checks, ensuring compliance with safety warnings.
10. Complete the Evaporator Inspection section, including voltage readings and amperage records. Follow all safety precautions as detailed.
11. Assess the start-up success by selecting yes or no and providing comments if necessary.
12. Finally, fill in the name of the person who performed the start-up, along with their company and phone number.
13. Save any changes made to the completed form. You can choose to download, print, or share the form as needed.

Complete the Liebert Datamate form online today to ensure your equipment warranty is secured.