Follow the steps to complete the Duct Leakage Affidavit online.

1. Click the ‘Get Form’ button to access the Duct Leakage Affidavit. This will open the document in the online editor for you to begin filling it out.
2. Enter the permit number at the top of the form in the designated field, ensuring that the number matches the project you are working on.
3. Fill in the project address where the duct leakage test is being conducted. This helps the authorities identify the specific location.
4. Indicate the conditioned floor area in square feet, as approved in the project plans. This information is crucial for proper assessment of duct leakage rates.
5. Specify where the test was conducted by entering the relevant location details in the provided field.
6. Report any flow rings used during the test in the appropriate fields, clarifying if the duct testing was conducted during the rough-in or post-construction stage.
7. Document the tester location and pressure tap location by filling in the corresponding fields to give clarity on where measurements were taken.
8. You will need to calculate and input the test method and the maximum duct leakage allowed for your specific project. Use the formulas provided within the form for accurate calculations.
9. Enter the amount of duct leakage recorded from the test results into the various designated fields, including post-construction and rough-in leakage rates.
10. Mark the test results as 'Pass' or 'Fail' per the outcomes of your duct leakage testing.
11. Certification is required—fill in your company name, technician name, and signature. Include the technician’s phone number, date of testing, and email address for verification purposes.
12. Once you have completed all sections of the affidavit, review the information for accuracy. You can then save changes, download, print, or share the completed form according to your needs.

Complete your duct leakage affidavit online to ensure compliance with local building codes.