STAMPED HOSE SELECTION The STAMPED acronym stands for the 7 major information areas required to provide a quality hose assembly. S stands for SIZE; I.D. and length; any O.D. constraints. T stands.
Open form follow the instructions
Easily sign the form with your finger
Send filled & signed form or save
How to fill out the STAMPED HOSE SELECTION - Hydraulic-supply.com online
Filling out the STAMPED HOSE SELECTION form is essential for ensuring you provide the correct specifications for a quality hose assembly. This guide offers clear, step-by-step instructions to assist you in completing the form accurately.
Follow the steps to complete the STAMPED HOSE SELECTION form online.
- Press the ‘Get Form’ button to access and open the STAMPED HOSE SELECTION form in your document editor.
- Begin with the Company Name field, where you enter the name of your company as the initiating party for the hose selection process.
- In the Contact field, provide the name of the person responsible for this request.
- Fill in the Phone field with the contact number for the listed person to facilitate communication.
- Proceed to the SIZE section, specifying the Inner Diameter (I.D.) and any Outer Diameter (O.D.) constraints along with the overall length required.
- In the TEMPERATURE section, input the minimum and maximum temperatures that the material may encounter, as well as the environmental temperature.
- Next, fill out the APPLICATION area, describing the conditions under which the hose will be used.
- In the MATERIAL/MEDIA section, clarify what materials will flow through the hose and specify any internal and external environmental factors.
- Enter the maximum working pressure for the hose assembly in the PRESSURE section, using the appropriate unit (PSI or kPa).
- In the ENDS section, characterize the ends of the hose assembly, detailing the style, type, orientation, and attachment methods needed.
- Complete the DELIVERY section by specifying quantity required, desired pickup or ship dates, method of shipment, any testing or certification requirements.
- Once all fields are filled, review the form for accuracy and completeness, then proceed to save your changes, download, print, or share the completed form as needed.
Complete your documents online today to ensure a smooth processing experience.
Experience a faster way to fill out and sign forms on the web. Access the most extensive library of templates available.
Related content
Remember the acronym, “STAMPED”. Use it as a checklist to select the right hose...
Hydraulic Hose Specialist, Reynolds Farm Equipment ... you select hoses, clamps, and...
If the nameplate is missing, the numbers can be found stamped on the right front web of...
Get answers to your most pressing questions about US Legal Forms API.
What does hose ID mean?
Inner diameter (I.D.) is the span of the empty space in a circular hose cross-section that affects the flow velocity of the fluid within the hose. A hose with an oversized I.D. will result in sluggish system performance, while an undersized I.D. can cause excessive pressure drops, leaks, and system damage.
What do numbers on a hose mean?
Each dash size corresponds to a progressively larger diameter, measured in sixteenths of an inch. “-1” is 1/16, “-2” is 2/16, and so on. In this case, -6 hose would indicate a hose with an inside diameter of 6/16”, or 3/8".
What does stamp stand for in hydraulics?
This is the perfect time to follow the acronym S.T.A.M.P. (for Size, Temperature, Application, Media, and Pressure) to be sure you a new hose that's properly matched to its job and will have the maximum lifecycle possible before it needs to be replaced again.
What are the hose selection criteria?
When selecting a tube or hose, the three main criteria are length, diameter, and material. Knowing your application criteria and media allows you to properly select these three components of your tube or hose. Incorrectly specifying a hose or tube could lead to a burst or failure causing leakage and system downtime.
How do I identify my hose?
Inside Diameter, or I.D., is the primary measurement used in identifying a hose's size. A ¾ inch hydraulic hose means the inside diameter of that is ¾ of an inch. Fittings that are used for a hose assembly will be identified by the same inside diameter measurement, i.e. a ¾ inch fitting for a ¾ inch hose I.D.
How do I choose a hydraulic hose?
When choosing a hose you should consider the pressure rating, temperature range, cover material and bend diameter among other factors. Before assembling a rubber hydraulic hose, clean it internally! Use brackets and supports wherever required to maintain the best hose position, and to avoid unnecessary flexing.
What does the acronym stamped stand for?
S.T.A.M.P.E.D. is an acronym which stands for: Size, Temperature, Application, Material/Media, Pressure, Ends, and Delivery. S.T.A.M.P.E.D.
What does stamped stand for on hose?
The STAMPED acronym is an industry-wide standard that should begin every conversation when selecting a hose for a new application. STAMPED stands for: Size, Temperature, Application, Material, Pressure, Ends and Delivery.
How do you read hydraulic hose sizes?
In the vast majority of common hydraulic hoses, the I.D. measurement is divided into 1/16” increments known as the “dash size.” For example, a hose measuring 3/4” ID will be shown as a “-12” coming from the numerator of the fraction of 3/4″=12/16”. A 1” ID would be 16/16 or a -16, and so on.
What does stamp stand for on hose?
The STAMPED acronym is an industry-wide standard that should begin every conversation when selecting a hose for a new application. STAMPED stands for: Size, Temperature, Application, Material, Pressure, Ends and Delivery.
Use professional pre-built templates to fill in and sign documents online faster. Get access to thousands of forms.
If you believe that this page should be taken down, please follow our DMCA take down process here.