Get Wood Burning Appliance Inspection Report

This guide provides a clear and user-friendly overview of how to complete the Wood Burning Appliance Inspection Report online. By following these steps, you will ensure that all required information is accurately captured for the inspection process.

Follow the steps to successfully complete the inspection report.

1. Press the ‘Get Form’ button to access the inspection report and open it in your digital editor.
2. Begin by filling out your personal information in the 'NAME', 'PHONE NUMBER', 'ADDRESS', 'CITY', 'STATE', and 'ZIP CODE' fields. Ensure that all entries are accurate.
3. Indicate who installed the appliance by checking either 'Insured' or 'Professional', and provide the corresponding name.
4. Answer the question regarding compliance with building codes by selecting 'Yes' or 'No'.
5. Identify the type of stove being inspected by checking the appropriate box for 'Wood Stove', 'Fire Place Insert', or 'Fireplace'.
6. Indicate whether the unit is the primary heat source in the dwelling by selecting 'Yes' or 'No'.
7. Describe the material of the floor or floor covering directly under the stove.
8. Provide the distance measurements in inches from the stove to the nearest wall and from the stove to the floor.
9. Specify the construction type of the nearest wall by choosing from 'Masonry', 'Frame/Wallboard', 'Wood', or 'Other'.
10. If the wall is wood or frame/wallboard, indicate whether a non-combustible heat shield is installed by checking 'Yes' or 'No'.
11. Measure and fill in the required distances for the under-stove protection extending beyond the edges of the stove: front, rear, right side, and left side.
12. For the stovepipe and chimney, indicate if the stove is vented to the outside by selecting 'Yes' or 'No'.
13. If vented, confirm whether the pipe passes through the wall above the stove by selecting 'Yes' or 'No'.
14. If the pipe passes through the back combustible wall, specify if it goes through a thimble or dead space without combustible materials within 18 inches by answering 'Yes' or 'No'.
15. Indicate if the stovepipe passes through any attic or concealed space by selecting 'Yes' or 'No'.
16. Confirm if the stovepipe attaches to a chimney outside, answering 'Yes' or 'No'.
17. For chimneys, indicate if it is made of double or triple wall construction by selecting 'Yes' or 'No', and specify the type.
18. Check if the chimney is free of rust by answering 'Yes' or 'No'.
19. Confirm that there are no holes or perforations in the chimney by selecting 'Yes' or 'No'.
20. Ensure that all pipe connections inside and outside fit snugly by answering 'Yes' or 'No'.
21. In the 'COMMENTS' section, provide any additional information or observations related to the inspection.
22. Lastly, have the 'OWNER/OCCUPANT' sign the form along with the 'INSPECTED BY' information and include the date.

Complete your WOOD BURNING APPLIANCE INSPECTION REPORT online today for a streamlined inspection process.