Print FormBackflow Assembly Test Report Send completed form and attachments to: backflow tol.caInitialPremises name Test DatePostal codeRPBA or RPDAPremises address Owners phoneOwners emailProtection:.
Open form follow the instructions
Easily sign the form with your finger
Send filled & signed form or save
How to fill out the Backflow Assembly Test Report - Township Of Langley online
This guide provides detailed instructions on how to properly complete the Backflow Assembly Test Report for the Township of Langley online. The information will ensure accuracy and compliance with local regulations while filling out the necessary forms.
Follow the steps to fill out the report accurately.
- Click ‘Get Form’ button to access the Backflow Assembly Test Report and open it in your preferred online editor.
- Begin by filling in the premises name, test date, postal code, and the applicable RPBA or RPDA. Ensure all fields are completed accurately.
- Enter the premises address, owner’s phone number, and owner’s email address. Check that the contact information is correct to avoid communication issues.
- Indicate the protection type by selecting either 'Domestic' or 'Sprinkler'. Provide the size of the assembly as required.
- For Check Valve #1 and Check Valve #2, denote whether they are 'Closed tight' or 'Leaked'. Fill in the corresponding psi values for each check valve.
- Complete the relief valve section by recording the psi value and noting if it 'Passed' or 'Failed'.
- If repairs are necessary, indicate the repair test date and fill in the condition of the check valves thereafter.
- Provide the tester name, certification number, business name, and business license number, ensuring that all professional credentials are accurately documented.
- Complete the air inlet valve section, noting the psi and whether it has 'Passed' or 'Failed'. Repeat the process for the check valve and air gap inspection, specifying if the requirements are met.
- Finalize the document by reading through all details to confirm accuracy. Users may save changes, download the completed form, print for physical submission, or share it via email as necessary.
Complete your forms online today to ensure efficient processing and compliance.
Experience a faster way to fill out and sign forms on the web. Access the most extensive library of templates available.
Related content
Jan 30, 2019 — T & S Backflow Testing And Repair. Akinjobi Backflow & Repair ... 1019...
I have the honour of submitting the Provincial Health Officer's report, “Progress on the...
Get answers to your most pressing questions about US Legal Forms API.
What are the three classifications or types of backflow protection?
The three classes of backflow risk are low, medium or high as per AS/NZS 3500.1:2015. Low Risk – where the water supply system poses a nuisance but does not endanger health or cause injury. Medium Risk – where the water supply system could endanger health. High Risk – where the water supply system could cause death.
How often must backflow preventers be tested?
To ensure the device is functioning properly, a certified backflow tester must test all backflow prevention devices annually.
What backflow assemblies are testable?
A DC is a testable mechanical backflow preventer that consists of two independently acting, spring-loaded check valves.
What does it mean if your backflow test fails?
If your backflow preventer fails the test, it needs to be cleaned or repaired and in some cases it may need to be completely replaced and a successful re-test performed. These backflow devices fail at a rate of 10-15% after one year.
Are double check valves testable?
A Double Check Valve Assembly is a testable backflow prevention assembly. A residential dual check is a non-testable device. Residential dual checks are not adequate protection for commercial, industrial, irrigation, fire protection, and other non-residential services.
What is a testable backflow prevention device?
A backflow prevention device is an apparatus that is fitted to internal water reticulation to prevent the reverse flow of potentially polluted water from a source within the property from entering the city's potable water supply or other reticulation within the property.
Where a testable backflow prevention device has been installed how often must it be tested?
An owner of an installed testable backflow prevention device must: (a) Register the device with the local government; and (b) Have the device inspected or tested for operational functioning at least once each year by a person who is licensed to carry out the work (s. 38(3) SPDR).
What does a backflow assembly look like?
1:29 4:41 Backflow Devices - YouTube YouTube Start of suggested clip End of suggested clip They're. Very common on the main line to the home from the meter. This is also very very common. TheMoreThey're. Very common on the main line to the home from the meter. This is also very very common. The underground irrigation. Systems. So if your backflow assembly is not located on this mainline.
Use professional pre-built templates to fill in and sign documents online faster. Get access to thousands of forms.
If you believe that this page should be taken down, please follow our DMCA take down process here.