Get Icd 705 Checklist

The wall panels are two layers of ½-inch thick or 5/8-inch thick standard gypsum board secured on the outside of the metal studs and one layer of ½-inch or 5/8-inch thick standard gypsum board secured on the SCIF side of the metal studs.

This Directive is designed to ensure the protection of Sensitive Compartmented Information (SCI) and foster efficient, consistent, and reciprocal use of SCIFs in the IC. This Directive applies to all facilities accredited by IC elements where SCI is processed, stored, used, or discussed .

DCID 6/9, Physical Security Standards for Sensitive Compartmented Information Facilities. Note: DCID 6-9 has been rescinded and superseded by ICD 705.

Follow these six steps to make sure your SCIF is designed and built correctly the first time. Step 1: Get a Government Sponsor. ... Step 2: Develop Pre-construction Documentation. ... Step 3: Develop the Facility Design. ... Step 4: Get Jurisdiction Approval. ... Step 5: Construct the SCIF. ... Step 6: Get Government Accreditation.

The General Requirements lays out the base line requirements in Chapter 3 Section C that all perimeter walls will need to meet, including a minimum of three layers of 5/8” gypsum wall board, acoustic fill, and staggered seams.

Sensitive Compartmented Information Facility (pronounced “skiff”), a U.S. Department of Defense term for a secure room. It can be a data center or a secure room that guards against electronic surveillance and suppresses data leakage of sensitive military and security information.

SCIF Requirements Acoustic materials must prevent conversations from penetrating the walls, or “white noise” speakers may be used to mask conversations. From an electronic perspective, SCIFs must have access controls, intrusion detection systems, and data communications that meet the highest security standards.