Get Boiler Installation Report I 1

Completing the Boiler Installation Report I 1 is essential for documenting details about the installation of a boiler. This guide will provide clear, step-by-step instructions to assist users in filling out this form accurately and efficiently.

Follow the steps to complete your Boiler Installation Report I 1 online.

1. Click the ‘Get Form’ button to obtain the form and open it in the editor.
2. Starting with the installation type, select whether the boiler is new, reinstalled, or second hand by choosing the appropriate option.
3. Provide the installer’s name under the 'installer' section. Ensure to fill in the date of installation as well.
4. In the owner-user section, fill out the name, street address, city, state, and zip code. Input the jurisdiction number and the national board number also.
5. Enter the manufacturer’s name, fuel type, method of firing, BTU/kw input, and BTU/kw output in the respective fields.
6. Indicate the operating PSI and fill out the stamped MAWP as well as the heating surface area in square feet.
7. Complete the pressure relief valve details including size, set pressure, and manufacturer information.
8. Specify the pressure relief valve capacity including BTU/hr and lb/hr.
9. Indicate the type of probe and switch if applicable, including any relevant piping details.
10. Document the pressure/altitude gauge information including dial graduation, valve/cock size, MAWP, and pipe connection size.
11. Fill in details for the expansion tank, including its capacity and ASME construction status.
12. Provide information about ventilation and combustion air, noting if any systems are unobstructed or if a power ventilator is used.
13. Complete the feedwater supply section with the number of feeding means, pipe sizes, and valve sizes.
14. Include information for stop valves and any connections related to bottom blowdown.
15. Document any requirements for potable water heaters including valve sizes and clearance.
16. Indicate the number and size of water level indicators, and provide whether a manufacturer’s certification is attached.
17. Finally, add any additional recommendations and remarks from the installer, then sign with the printed name and registration number.
18. Once all sections are completed, save changes, download, print, or share the form as needed.

Complete your Boiler Installation Report I 1 online today to ensure all necessary details are accurately documented and submitted.