Get Engineering Inspection Checklist

Completing the Engineering Inspection Checklist online is a crucial step in ensuring the safety and functionality of fire pump systems. This guide will walk you through each section and field of the form, providing clear instructions to facilitate a thorough inspection process.

Follow the steps to effectively fill out the checklist.

1. Press the ‘Get Form’ button to download the Engineering Inspection Checklist and open it in the appropriate online platform.
2. Begin by entering the date the fire pump is tested in the designated area at the top of the form. This date is critical for record-keeping.
3. Indicate who conducted the inspection by writing your initials in the 'Tested by Whom' section.
4. Record the engine run time in minutes for the weekly operation of all internal combustion engines. Make sure to operate each engine for at least 30 minutes.
5. Fill in the pump suction and discharge pressure readings, making note of the values in the corresponding fields.
6. Document the RPM reading when the pump is at maximum speed.
7. Check the oil pressure against the manufacturer’s specifications and record your findings. Note any issues and the need for repairs.
8. Check the condition of the cooling water supply and document the results.
9. Record the amps reading from the engine gauge, ensuring that it adheres to the correct range.
10. Verify the condition of the battery charger and indicate whether it is charging satisfactorily.
11. Indicate the fuel tank level, aiming to keep it at least 3/4 full to avoid condensation.
12. Examine the oil stick for the level and condition of crankcase oil, adding oil as required.
13. Measure the pump room temperature and ensure that it falls within acceptable limits.
14. Test the functionality of the water and oil heater for the engine and record your assessment in the provided space.
15. Complete items regarding fire pump automatic start pressures and the operation of the jockey pump.
16. Review and complete the checklist for any additional testing items and comments on deficiencies noted during the inspection.
17. Finalize the document by adding the inspector's signature and, if applicable, the supervisor's signature. After completing all fields, save any changes made.

Complete your Engineering Inspection Checklist online today to ensure compliance and safety.