Get Humidity And Temperature Sensor

Temperature and humidity sensor (or rh temp sensor) is devices that can convert temperature and humidity into electrical signals that can easily measure temperature and humidity.

Humidity is also important. If it is humid and the tempertaure falls, droplets of water can condense on the thermometer tube. Since energy is given off when water goes from the vapor to the liqud phase, the temperature reading could be artifically raised in the mercury column.

When the relative humidity is either very high or very low the sensor performance deteriorates. Most Electrochemical gas sensors contain a liquid, aqueous electrolyte which is in equilibrium with the humidity content of surrounding air. At dry conditions the electrolyte will lose water and gain water at high humidity.

Humidity is how much water vapor is in the air. When we perspire, our bodies normally rely on air to get rid of the sweat that accumulates on the skin. This allows the body to cool down. When the humidity in the air is high, the warm moisture stays on our skin longer, making us feel even hotter.

A temperature and humidity sensor are low cost-sensitive electronic devices that detects, measures and reports both dampness and air temperature. The proportion of moisture noticeable all around to the highest amount of moisture at a specific air temperature.

A removable protective cover is a thin polyimide tape that covers over the entire surface of the humidity sensing component. It is a shield for temporary protection of the sensing element from contaminants, and should be removed before being used.

The Electrochemical sensor exhibits good stability and fast response in room air at ambient temperature over a reasonable humidity range. When the relative humidity is either very high or very low the sensor performance deteriorates.