Get Turbidity Grab Sample Form - Clallam County Home Page - Clallam

Filling out the Turbidity Grab Sample Form is essential for documenting water quality assessments. This guide will provide you with step-by-step instructions to ensure accurate and efficient completion of the form.

Follow the steps to fill out the Turbidity Grab Sample Form correctly.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin by entering the name of the sampler in charge, including their middle initial, in the designated field.
3. Fill in the date of the sample collection using the format: day/month/year.
4. If samples are taken away from the field, provide the name and middle initial of the turbidimeter operator, along with the date.
5. Complete the pre-monitoring checks by noting the last calibration date of the turbidimeter and any calibration checks performed at the beginning and end of the sampling session.
6. Document the bottle number, site name, site description, and time of sample collection using military time.
7. Record the stream conditions observed, including color and cloudiness, and any notable issues or unusual situations encountered during sampling.
8. For samples that were taken away from the field, indicate the holding temperature of the check bottle.
9. Complete the HF turbidimeter readings in the designated fields for each reading, ensuring to note the time of each reading.
10. Similarly, fill in the readings for the Hach turbidimeter, documenting the time of each reading.
11. Specify the meter used and record the temperature of warmed sample bottles to the nearest 0.1 °C.
12. Once all fields are completed, review the form for accuracy. You can then save changes, download, print, or share the form as needed.

Complete your documents online today for effective water quality monitoring.