Get Asme Form 26-1 2017

Filling out the ASME Form 26-1 is an essential process for those involved with bellows expansion joints under the ASME Section VIII, Division 1. This guide offers clear, step-by-step instructions to assist users in completing the form online with ease and accuracy.

Follow the steps to successfully complete ASME Form 26-1 online:

1. Press the ‘Get Form’ button to access the ASME Form 26-1 and open it for editing.
2. Begin by entering the date of submission in the designated field.
3. Specify the applicable ASME Code Edition that is relevant to your submission.
4. In Item Number, provide the specific number associated with the vessel.
5. Fill in the Vessel Manufacturer's name in the appropriate section.
6. Document the Drawing, Tag, Serial, or Job Number for reference.
7. Include the Vessel Owner's name to establish ownership.
8. Indicate the Quantity of bellows expansion joints being submitted.
9. Mention the Installation Location where the joint will be utilized.
10. Record the size of the bellows expansion joint.
11. Outline the Internal Pressure in psig, detailing the design specification.
12. List the External Pressure in psig as per the design requirements.
13. Provide the Vessel Manufacturer Hydrotest Pressure for internal verification.
14. State the Design and Operating Temperatures for the joint.
15. Fill in the Vessel Rating details, including MAWP and MDMT.
16. Specify the Overall Length of the expansion joint.
17. Indicate the installed position of the joint as Horizontal, Lateral, Vertical, or Angular.
18. Document any Design Torsion or Moment in in-lb or Twist Angle.
19. State the Shell Material and Bellows Material in their respective fields.
20. Enter the Shell Thickness, along with any required radiography details.
21. Detail the End Preparation, including any allowances or types used.
22. Complete the Heat Exchanger Tube Length Between Faces if applicable.
23. Indicate the Maximum Bellows Spring Rate in N.
24. Specify the Internal Liner status and its material if applicable.
25. Mention Drain Holes in the liner, including Quantity and Size.
26. Specify if Liner Flush with Shell I.D. applies and whether telescoping liners are needed.
27. Document the External Cover status and material.
28. State if Preproduction Approvals are required, including Drawings, Calculations, or Procedures.
29. List any Additional Requirements as needed, such as ultrasonic inspections.
30. Once all information is entered, save your changes and download, print, or share the completed form as necessary.

Complete your ASME Form 26-1 online now to ensure compliance and streamline your documentation process.