Get Earth Electrode Subsystem Checklist For Existing Facilities. Da Form 7452-4-r, Feb 2002

This guide provides comprehensive and user-friendly instructions on completing the Earth Electrode Subsystem Checklist for Existing Facilities, DA Form 7452-4-R, February 2002. Whether you are a seasoned professional or new to this type of documentation, follow these steps to ensure an accurate and thorough completion of the checklist.

Follow the steps to successfully fill out your checklist.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin by filling in the 'Facility' field with the name of the facility you are inspecting.
3. Provide the 'Date' of inspection in the format YYYYMMDD.
4. Enter the 'Location' where the inspection is taking place.
5. Fill in the 'Inspector' field with the name of the person conducting the inspection.
6. Sketch the layout of the Earth Electrode Subsystem in the designated area or attach a current engineering drawing.
7. Select the 'Soil Conditions' from the types available (e.g., loam or humus, clay, sand, gravel).
8. Record the 'Earth Electrode Subsystem Resistance Measurement' by specifying the measured values for each soil type.
9. Indicate the 'Last Resistance Measurement' date and the number of 'Months Since Last Resistance Measurement.'
10. Fill out the components under 'Component Identification', starting with 'Ground Rods', noting type, size, length, and physical condition.
11. Document 'Ground Conductors' with details on type, size, material, and physical condition.
12. Provide information for 'Interconnecting Conductors', including type, size, and material.
13. Assess the 'Risers' for physical condition and measured resistance.
14. Inspect the 'Ground Wells' and note physical condition along with measured resistance.
15. Describe the 'Weather Conditions' at the time of inspection, selecting from wet, dry, snow, rain, or mist.
16. Record the 'Measured Temperature' at the time of inspection.
17. Indicate the 'Days Since Last Precipitation' in the relevant section.
18. After filling out all sections, review the entries for accuracy.
19. Once completed, you can save changes, download, print, or share the form as needed.

Start completing your Earth Electrode Subsystem Checklist online now to ensure facility safety and compliance.