Follow the steps to complete the TX blower door/duct blaster data sheet seamlessly.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin with the client and job number fields at the top of the form. Enter the relevant client information and job reference number to ensure proper identification.
3. Next, input the total square footage of the unit and its ceiling height. These measurements are pivotal for calculating air infiltration rates.
4. Provide the total volume of the unit as well as initial readings from your assessment, including ACH target and initial blower door CFM readings at the specified pressure.
5. Record details for initial total duct leakage and WRTO duct leakage along with their respective pressure measurements. Ensure accuracy as these figures are critical.
6. Document the duct operating pressures before duct sealing, specifying the supply and return pressure readings.
7. Fill in the pressure pan readings per register during the assessment, ensuring each register has been accounted for.
8. Complete the ASHRAE readings at the assessment phase for all listed registers, noting the presence of open windows and additional details.
9. Proceed to the final inspection readings, repeating the data recording process for final blower door CFM reading, total duct leakage, and WRTO duct leakage.
10. Capture the duct operating pressures after duct sealing and repeat the pressure pan readings per register.
11. Verify if the subrecipient met blower door and duct leakage target CFM, making note of any failures and required next steps.
12. Finally, certify that all provided information is accurate by signing and dating the document, then ensure to save changes, download, print, or share the completed form as needed.

Start filling out the TX blower door/duct blaster data sheet online for effective energy assessment!