Get Inland Craft Products Msds For Dop Wax - Aussie Sapphire

Filling out the MSDS for Dop Wax - Aussie Sapphire is an important task that ensures safety and compliance in handling this product. This guide provides a clear, step-by-step approach to filling out the material safety data sheet, helping users navigate each section effectively.

Follow the steps to complete the MSDS accurately.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin by filling out Section I, Supplier Information. Enter the supplier name 'Inland Craft Products, Co.', followed by the street address '32052 Edward', city 'Madison Heights', state 'Michigan', zip code '48071', emergency phone number '1-248-583-7150', and regular phone number '1-248-583-7150'. Make sure to double-check all entries for accuracy.
3. Proceed to Section II, Identification / Hazardous Ingredients. Write 'Dop Wax' in the Product or Trade Name field, enter 'No. #2 Stick Wax' under Chemical Names/Synonyms, and '450100' for the Product Code. Describe the appearance as 'Waxy solid, green in color,' and indicate the use as 'Attachment.' Note that the product is not hazardous and list the contents: 'Flake Shellac, Gum Rosin, Whiting'.
4. In Section III, Physical Data, fill in the boiling point as '170 ºF', melting point as '160 ºF', and state the reactivity in water as 'None'. Indicate that there is no fragrance or odor.
5. Move to Section IV, Fire and Explosion Hazard Data. Record the flash point using the method '157', allow 'Dry Chemical' as the extinguishing media, and mention 'Dry Chemical' for special fire fighting procedures. Confirm that there are no unusual fire and explosion hazards.
6. For Section V, Reactivity Data, simply state that the product is 'Stable,' with no conditions to avoid or hazardous polymerization expected.
7. In Section VI, Health Hazard Data, mention that there are no points of entry, signs and symptoms of exposure, or medical conditions aggravated by exposure. State that there are no emergency or first aid procedures needed.
8. Next, move to Section VII regarding Precautions for Safe Handling and Use. Indicate that there are no special steps needed in case of spills or precautions for handling and storing.
9. Finally, in Section VIII, Control Measures, note that protective gloves are required when melting the product, and state that no other protective clothing or equipment is necessary.
10. After you have completed all sections, review the information for accuracy. You can then save changes, download, print, or share the form as needed.

Complete your MSDS online to ensure compliance and safety.