Get Inspection Method Sheet

This guide provides clear and detailed instructions on completing the Inspection Method Sheet, ensuring accurate and efficient documentation. Follow the steps below to fill out each section of the form online with confidence.

Follow the steps to complete the Inspection Method Sheet.

1. Press the ‘Get Form’ button to access the Inspection Method Sheet and open it in your online editing tool.
2. Begin by filling in the part number and drawing number at the top of the form. This information is crucial for proper identification.
3. For the part name, enter 'PCB Filters' as specified. Next, indicate the operation status as either 'In Process' or 'Final'.
4. In the written by section, enter the name of the person responsible for the document, in this case, 'Myra Cope'. Include the date of completion in the format 'MM-DD-YY'.
5. Refer to the applicable customer specifications as they take precedence. Ensure to attach or reference any necessary documents that support this process.
6. Proceed to the description/dimensions section. Ensure that you cover each detail related to the shifted substrate, substrate chips, discrete inductors, and capacitors, providing adequate explanations and measurements as necessary.
7. Verify the sample size and method of inspection for each aspect detailed. Enter '100%' for methods applicable to your inspection, alongside any specified magnification requirements.
8. Review the quality and condition of solder joints as specified, noting any acceptable or rejectable conditions along with the proper inspection methods.
9. Continue filling out each inspection criterion, making sure to follow the established sample sizes and quality standards set by the IPC-A610 and IPC-A-600 guidelines.
10. Once all applicable sections have been filled out, save your changes to the form. Then, you can choose to download, print, or share the completed Inspection Method Sheet online.

Complete your Inspection Method Sheet online today for efficient documentation.