Get Appia 2 Compact Spec Sheet

Filling out the Appia 2 Compact Spec Sheet online is a simple and efficient process. This guide provides clear instructions to help you complete each section accurately and ensure that all necessary information is provided.

Follow the steps to complete the form successfully.

1. Press the ‘Get Form’ button to acquire the form and launch it in your online editing interface.
2. Begin with the power requirements section. Fill out the voltage, wattage, and amp draw fields as specified: Volts should be 220 (voltage range of 208-240), watts must be entered as 3000, and the amp draw should be noted as 14.
3. Enter the water requirements. Ensure you fill in specific details such as the need for a 3/8” dedicated cold water line with a shut-off valve, the maximum allowable water hardness, and confirm requirements on the minimum incoming flow rate and maximum line pressure.
4. In the water softening equipment section, fill in the required capacities for single, double, triple, automatic, and manual softening as applicable.
5. Complete the shipping dimensions and weight part by entering the height, depth, width, and weight as mentioned: height of 27 inches, depth of 24 inches, width of 24 inches, and total weight of 150 pounds.
6. In the counter space requirements section, input the dimensions required: height of 21 inches, depth of 22 inches, width of 22 inches, and specify the weight of 130 pounds.
7. For the drain requirements, indicate the need for an open gravity drain of a minimum 1.25 inch I.D., located within 4 feet of the machine.
8. Finally, in the customer acknowledgment section, provide the customer name, signature, company name, phone number, fax, and email. This information certifies your understanding of the installation requirements.
9. Once all fields are complete, save your changes, and download, print, or share the filled form as needed.

Start completing your Appia 2 Compact Spec Sheet online today!