Get Fitting Instructions For 3m Elastomeric

This guide provides clear and supportive instructions for completing the Fitting Instructions for 3M Elastomeric full face, 6 strap respirator online. Follow these steps to ensure proper fitting and safety.

Follow the steps to successfully fill out the fitting instructions.

1. Press the ‘Get Form’ button to access the fitting instructions document and open it in your preferred editor.
2. Begin by reading through the instructions provided to familiarize yourself with the fitting process for the elastomeric full face, 6 strap respirator.
3. Fully loosen all six head straps before attempting to position the facepiece.
4. With one hand, pull your hair back to ensure a clear fit around your face. Bring the respirator facepiece up to your face with your other hand.
5. While holding the facepiece securely in place, carefully pull the straps over your head.
6. Once the facepiece is positioned, tighten the two bottom straps first, followed by tightening the two middle straps, and finally the two top straps to ensure a snug fit.
7. Perform a seal check to verify that the respirator creates a secure fit against your face. Conduct both positive and negative pressure checks as outlined in the instructions.
8. If any air leaks occur during the seal checks, reposition the respirator and readjust the straps for a better seal.
9. If you are unable to achieve a proper seal after multiple attempts, do not enter the contaminated area and consult with your supervisor.
10. Once you have successfully filled out the fitting instructions and completed the necessary checks, save any changes you made, then download, print, or share the document for your records.

Complete the fitting instructions online to ensure your safety and compliance.