Get Infection Control Risk Assessment Matrix Of Precautions ...

This guide provides users with step-by-step instructions for completing the Infection Control Risk Assessment Matrix Of Precautions online. By following these directions, users will ensure they properly assess infection control risks and comply with safety standards during construction and renovation projects.

Follow the steps to successfully complete the assessment matrix.

1. Press the ‘Get Form’ button to acquire the Infection Control Risk Assessment Matrix and open it for editing.
2. Begin with Step One, where you will identify the type of construction project activity by selecting from Types A-D based on the activity involved.
3. Proceed to Step Two, which requires you to identify the patient risk groups affected by the construction activity. Choose the highest risk group if more than one is applicable.
4. In Step Three, match the identified patient risk group with the construction project type (A, B, C, or D) using the provided matrix. This will determine the class of precautions required.
5. Move to Step Four; assess the areas surrounding the project area for potential impacts, including assessing risk groups in adjacent units.
6. Complete Step Five by identifying the specific site of activity, noting locations such as patient rooms or medication areas.
7. In Step Six, indicate any anticipated disturbances to ventilation, electrical, or plumbing systems due to the construction activities.
8. Identify containment measures expected in Step Seven, specifying the type of barriers required.
9. Continue to Step Eight, where you will address any risks related to potential water damage due to construction.
10. In Step Nine, evaluate whether noise levels will disrupt patient care activities and indicate if work will be done during non-patient hours.
11. Step Ten requires you to confirm that the plan allows for sufficient numbers of isolation and negative airflow rooms, as well as handwashing sinks.
12. Proceed to Step Eleven to evaluate the adequacy of plans for clean and soiled utility rooms.
13. In Step Twelve, document your expectations for the containment of traffic flow, debris removal, and cleanup processes.
14. Conclude with Step Thirteen by assessing the risk to construction workers concerning exposure to any tuberculosis disease or related specimens. Outline any required personal protective equipment.
15. After filling out all necessary sections, review the information for accuracy, and save your changes. You can then download, print, or share the completed assessment matrix.

Complete and submit your Infection Control Risk Assessment Matrix Of Precautions online today to ensure safety during construction.