Get Installation And Start-up Checklist - Intellihot

Filling out the Installation and Start-up Checklist - Intellihot is an essential step to ensure that the installation process is complete and meets all necessary standards. This guide will provide clear and detailed instructions to help users complete the checklist efficiently and accurately.

Follow the steps to complete the checklist effectively.

1. To begin, click the ‘Get Form’ button to access the Installation And Start-up Checklist - Intellihot and open it in your preferred document editor.
2. Fill in the model number and serial number in the designated fields at the top of the form.
3. Provide the job name, installation date, city, state, and ZIP code in the corresponding sections to help identify the installation site.
4. In the WATER SIDE section, verify that a Y-Strainer is installed at the inlet for iQ750/iQ1000 models, check the orientation and type of the check valve, and ensure the pump sizing and location are correct.
5. Determine and record the recirculation flow, and check that piping is configured for first in/last out reverse loop if applicable. Confirm the installation of the pressure relief valve according to local codes.
6. In the GAS SUPPLY section, specify whether natural gas or liquid propane is used, check gas pressure according to the Installation & Operation manual, and verify that the gas line meets demand requirements.
7. Ensure that a drip leg/sediment trap is installed per code and confirm that the gas regulator is correctly sized.
8. Move on to the FLUE AND FRESH AIR section, noting the size of the fresh air opening, the vent size as detailed in the manual, and confirming proper installation of sweeping tees.
9. Check the separation distance between intake and exhaust, and verify that bird screens and elbows are installed as required.
10. Record the vent configuration and the CO2 emissions.
11. In the CONDENSATE section, confirm that there is a constant downward slope, check clearance to avoid air lock, and ensure condensate treatment is installed per code.
12. Verify that a condensate p-trap (loop) is installed and fill out the relevant specifications as necessary.
13. For the ELECTRICAL section, ensure that the electrical service meets requirements for the number of units installed and check for correct polarity on the outlet.
14. At the end of the form, fill in the start-up performed by section, providing the company name and phone number, and have the person responsible print their name and provide their signature.
15. Lastly, complete the start-up approved by section in a similar manner, ensuring all necessary approvals are documented. Users can then save changes, download, print, or share the completed form as needed.

Complete your Installation And Start-up Checklist - Intellihot online today.