Get Guide For Completing National Board Form R-1 Report Of Repair - Nationalboard

This guide offers step-by-step instructions for users to effectively complete the National Board Form R-1, Report of Repair. It aims to provide clarity and support to ensure accurate submissions in compliance with the National Board Inspection Code.

Follow the steps to complete the NATIONAL BOARD FORM R-1 online.

1. Click ‘Get Form’ button to acquire the form and open it in the editor.
2. Complete the initials section for the authorized representative and the inspector. Fill in the required details as indicated.
3. Register the Form 'R' Report by entering the unique sequential number assigned. If the form is not to be registered, indicate 'N/A'.
4. Document the unique purchase order, job, or tracking number assigned by the organization handling the work, if applicable.
5. Provide the name and address of the National Board 'R' Certificate of Authorization Holder as it appears on their Certificate of Authorization.
6. Enter the name and address of the pressure-retaining item owner.
7. Complete the location of installation section by providing the name and address where the pressure-retaining item is installed.
8. Describe the pressure-retaining item, including its type (such as boiler, pressure vessel, or piping) and applicable unit identification.
9. Indicate the name of the original manufacturer of the pressure-retaining item, or state 'unknown' if not applicable.
10. Document the serial number of the pressure-retaining item. If not assigned or unknown, state 'unknown'.
11. If registered with the National Board, enter the registration number, or provide the registration number if installed in Canada and include any drawing number under 'other'.
12. Document the Jurisdiction Number if it is available.
13. Provide any additional unique number assigned to the pressure-retaining item. If unknown, state 'unknown'.
14. Identify the year of fabrication or construction completion of the item.
15. Indicate the edition and addenda of the National Board Inspection Code under which the work is completed.
16. Fill in the name, section, division, edition, and applicable addenda of the original code of construction.
17. Indicate the name, section, division, edition, and applicable addenda of the construction code used for the work. List any code cases in the 'Remarks' section.
18. State the type of repair conducted, such as welded or the use of other materials.
19. Provide a detailed summary of the completed scope of work, including methods and tests applied.
20. Indicate the type of pressure test applied to the item.
21. Document the test pressure that was applied during testing.
22. Indicate the maximum allowable working pressure of the pressure-retaining item.
23. List any replacement parts used, including part numbers and relevant manufacturer information.
24. Provide any additional information related to the work performed.
25. Type or print the name of the authorized representative of the National Board 'R' Certificate of Authorization.
26. Enter the National Board 'R' Certificate of Authorization number.
27. Indicate the expiration date of the National Board 'R' Certificate of Authorization.
28. Enter the date the repair was certified.
29. Record the name of the National Board 'R' Certificate of Authorization Holder who performed the work.
30. Ensure the authorized representative signs the form.
31. Type or print the inspector's name.
32. Indicate the inspector's jurisdiction.
33. Document the inspector's employer.
34. Provide the address of the inspector's employer, including the city and state or province.
35. Indicate the date the inspector conducted their inspection.
36. Ensure the inspector signs the completed form.
37. Document the inspector's National Board commission number and any required jurisdiction numbers.
38. Once completed, review the entire form for accuracy, then save changes, download, print, or share the form as necessary.

Start completing your National Board Form R-1 online today.