Get Primary Setup Tool (pst). Configuration Manual

The Primary Setup Tool (PST) is an essential resource for configuring SIMATIC NET network components. This guide will walk you through the process of filling out the PST Configuration Manual to ensure accurate and effective setup.

Follow the steps to complete the Primary Setup Tool (PST) Configuration Manual.

1. Click the ‘Get Form’ button to access the Primary Setup Tool (PST) Configuration Manual, ensuring it's ready for your input.
2. Once the form is open, read the preface and description sections to familiarize yourself with the PST and its functionalities.
3. Proceed to the software installation section. Follow the instructions by locating the setup file and executing it to install the PST on your device.
4. Navigate to the functions section. Understand the user interface and menu commands outlined to effectively utilize the tool.
5. Browse the network to identify devices. Use the Network > Browse menu command or the designated toolbar button to begin this process.
6. Configure Ethernet interfaces by selecting the required device and entering necessary IP address information, ensuring to follow specified guidelines.
7. If necessary, configure PROFIBUS interfaces for relevant modules, following similar selection and data entry methods as for Ethernet.
8. Review any filters that may be applicable to your settings to streamline your configuration process.
9. Once all configurations are entered, proceed to download settings to the module by selecting the appropriate commands from the menu.
10. Finally, save changes to the form. You may choose to download, print, or share your filled-out PST Configuration Manual as needed.

Start filling out the Primary Setup Tool (PST) Configuration Manual online today to optimize your network configuration!