Get 305 547 3046

This guide provides clear and supportive instructions for filling out the 305 547 3046 form online. Follow these steps to ensure accurate completion of the backflow prevention assembly test report.

Follow the steps to successfully complete the form.

1. Click ‘Get Form’ button to access the form and open it in your document editor.
2. Enter the address where the backflow prevention device is located in the designated field. Be as precise as possible to avoid any discrepancies.
3. Provide the owner's details by filling out their name, contact information, and address. Ensure all fields are correctly filled to prevent any delays.
4. Record the tester's name, certification number, and business information clearly in the respective fields.
5. Input the specifics of the test kit utilized, including the make, model number, and serial number associated with the test kit.
6. Select the type of assembly and its model number, as well as the exact location of the assembly within the premises.
7. Document the date of the last calibration and the initial and annual test results in the appropriate sections, ensuring accuracy.
8. Fill out the data regarding the shut-off valves and any noted conditions, such as whether they closed tightly or leaked.
9. Record all pertinent measurements from the test, including pressure readings and meter details.
10. Complete the remarks section if the assembly failed during the testing. Document any repairs made to address the failures.
11. Ensure all fields are filled completely and accurately, as incomplete test forms will be returned.
12. Finally, certify the testing by signing your name and entering the date of completion at the bottom of the form.

Complete your forms online today for a smoother submission process.