Get 9904-04 2.4 Inch Qvga.doc

Filling out the 9904-04 2.4 Inch QVGA.doc form online is a straightforward process designed to collect essential product specifications effectively. This guide will walk you through each step, ensuring you complete the form accurately and efficiently.

Follow the steps to successfully complete the form.

1. Click the ‘Get Form’ button to acquire the document and launch it in your online form editor.
2. Begin by entering the part number in the designated field, which should be 9904DPLP024H-04.
3. Fill in the overall dimensions, including width, height, and thickness as 42.72 mm, 59.46 mm, and 2.8 mm, respectively.
4. Enter the active area measurements, specifying the height as 36.72 mm and the vertical as 48.96 mm.
5. Indicate the resolution by entering 240 RGB horizontally and 320 vertically.
6. Document the display mode as TN, normally white, transmissive.
7. Specify the LCD type as a-Si TFT.
8. Input the contrast ratio, noted as 500:1 typical.
9. For the view direction, specify 9 o’clock.
10. Fill in the grayscale inversion direction as 3 o’clock.
11. Enter the diagonal measurement of 2.4 inches.
12. Fill in the viewing angles, providing values of typically 60° for left/right and 65° for top/bottom.
13. Input the brightness, listed as 480 cd/m² at If=20mA.
14. Note the NTSC percentage as 55%.
15. Specify the driver IC as ST7789S or equivalent.
16. Document the VDD power supply range as 2.4V - 3.3V.
17. Indicate the interface type, which may consist of parallel CPU/SPI/18-bit RGB.
18. For the backlight system, enter details as 4 white LEDs in series.
19. Specify the forward voltage as 4 x 3.2V typically.
20. Document the forward current as 20 mA typically.
21. Finally, save the changes, and you may choose to download, print, or share the completed form.

Get started completing your documents online today!