Get Sweatmiser

This guide provides step-by-step instructions for completing the Sweatmiser form online. It is designed to help users accurately fill out each section, ensuring all necessary information is recorded correctly.

Follow the steps to complete the Sweatmiser form effectively.

1. Click the 'Get Form' button to access the Sweatmiser online form and open it in the document editor.
2. Begin by entering the record store information. Provide the customer name, store number, installation date, and technician name in the designated fields.
3. Check for sweating by carefully reviewing each glass door and frame in the store. Document any existing issues before installation and ensure to have the store manager sign off on these observations.
4. If pre-existing conditions are noted, troubleshoot and record the findings on the form. Include specifics like voltage at heaters and any temperature discrepancies.
5. Locate the existing Sweatmiser unit which is typically found in the rack house or electrical room, ensuring to record its current condition.
6. Clean the Sweatmiser unit using compressed air and a rag with a liquid cleaner to maintain a dust-free environment.
7. Document obsolete parts that will be replaced. Clearly indicate Circuit board, humidity sensor, fan, wires, and faulty relays.
8. Record the replacement of the humidity sensor on the form, ensuring to note if the old sensor was labeled 'ASP' or 'General Electric'.
9. Remove the circuit board and document this step on the form, allowing space for future notes on this process.
10. Finalize the installation steps by organizing all wiring as per the guidelines, using zip ties, and checking all terminations on the form for accuracy.
11. Before concluding your work, calibrate the Sweatmiser using the values measured and noted on the form, and ensure all data is recorded accurately.
12. Complete the service sticker application on the outside of the Sweatmiser and ensure the manual is correctly placed inside as described.
13. Double-check all sections of the installation form for completeness. If any fields are zero, ensure to mark them as such.
14. Finally, obtain the store manager's signature and stamp to validate the work performed, ensuring all job site cleanup is done before leaving.

Complete the Sweatmiser form online now to ensure proper documentation and installation practices.