Get Concrete Control Test Form - Dot State Oh

Filling out the Concrete Control Test Form accurately is essential for effective concrete quality control. This guide will walk you through the process step-by-step, ensuring you understand each component of the form and how to complete it online.

Follow the steps to fill out the Concrete Control Test Form online.

1. Click ‘Get Form’ button to obtain the form and open it for editing.
2. In the first section, enter the project number, company/route/section, and your name. Include the date and truck number, which are crucial for identifying the specific details of the test.
3. Record the arrival and discharge times. Accurate timing is important for the integrity of your concrete testing process.
4. Fill in the placement description and location. This information helps track where the concrete was used and how it was poured.
5. Input the cylinder sample numbers and the class of concrete used. These details are essential for further testing and classification.
6. Complete the full pot weight and empty pot weight fields to calculate the concrete weight.
7. Determine the air pot factor, which is necessary for calculating the final weight of one cubic foot of concrete.
8. Record the batch weight, including detailed weights for fine aggregate, coarse aggregate, cement, water batch, and any additional weight, specifying weights in pounds per cubic yard as applicable.
9. Calculate and enter the one cubic yard batch weight based on the inputted values from previous steps.
10. In the yield test results section, compute the yield based on the one cubic yard batch weight and the unit weight of the sample. Document air percentage, slump measurement, air temperature, and concrete temperature.
11. Review all of the entries for accuracy. After ensuring all information is correct, you can save your changes, download, print, or share the completed form as needed.

Start filling out your Concrete Control Test Form online today for proper documentation and quality assurance!