Get Reduced Pressure Device (rp) - Hamilton

Filling out the REDUCED PRESSURE DEVICE (RP) form for Hamilton is an essential step in ensuring the safe installation and maintenance of backflow prevention devices. This guide provides a user-friendly, step-by-step approach to completing the form online, ensuring accuracy and compliance with local regulations.

Follow the steps to successfully complete the REDUCED PRESSURE DEVICE (RP) - Hamilton form online.

1. Press the ‘Get Form’ button to obtain the document and open it for editing.
2. Begin by entering the date the test was completed in the format MM/DD/YY. Provide the TRN number in the designated field, which is essential for tracking the report.
3. Fill in the facility name and address where the device is installed. This information is critical to identify the location of the device being tested.
4. In the section for the tester's name, ensure to print your name clearly. Complete the city, postal code, and phone number fields accurately for contact purposes.
5. Enter your City of Hamilton's Backflow Program contractor registration permit number and your tester certification number (OWWA or ASSE) to verify your qualification.
6. Record the make and model number of the test equipment you are using and its serial number in the respective fields. This data is vital for quality control.
7. Identify the person on site who will receive a copy of the test report and enter their name.
8. Input the calibration due date for your test equipment following the MM/DD/YY format, ensuring all equipment is up to date.
9. For the REDUCED PRESSURE DEVICE (RP) section, indicate if it is part of a REDUCED PRESSURE DETECTOR ASSEMBLY (RPDA) by selecting 'Yes' or 'No'. Fill in the device location, size, serial number, manufacturer, and model.
10. Select the type of test being conducted (initial, annual, pass, fail). Provide the backflow prevention device number and the line pressure at the time of the test in PSI.
11. Complete the check valve and shut-off valve sections, noting if they closed tightly, leaked, and documenting the pressure differential.
12. Determine if the device is installed according to By-law # 10-103, capturing any corrective measures required if it is not.
13. In the comments section, provide any necessary notes or observations related to the test or installation.
14. Finally, ensure the signatures of the tester and property owner are present, along with their printed names. Verify all contact information is accurate before submission.
15. After completing the form, users can save their changes, download a copy for their records, print the form, or share it as needed.

Take action now and complete your REDUCED PRESSURE DEVICE (RP) form online.