Get Bucket Elevator Specification Form

The Bucket Elevator Specification Form is a crucial document for providing necessary specifications about your bucket elevator system. This guide will help you navigate through the form, ensuring all relevant information is accurately filled out for efficient processing.

Follow the steps to successfully complete the form online.

1. Click ‘Get Form’ button to retrieve the form and display it in your editor.
2. In the 'Company' section, enter the name of your organization and contact person. Make sure to provide accurate information to facilitate communication.
3. Fill in the 'Address', 'Phone', 'Fax', and 'E-mail' fields. This information is essential for documentation and correspondence.
4. Proceed to the 'Current Bucket Size' and 'Current Bucket Style' fields. Specify the size and style of the bucket, including its material.
5. Input the name of the 'Bucket Manufacturer' in the appropriate field to identify the source of the buckets you are using.
6. Move to the 'Head Pulley' section and enter the 'Bucket Spacing on Belt' to define how the buckets are positioned.
7. For the 'Head Shaft and Bearing' section, indicate the number of bucket rows being utilized.
8. Detail the 'Product Being Elevated' to clarify what materials are being transported through the bucket elevator.
9. Fill in the 'Product Density', 'Moisture Content', 'Oil or Fat Content', 'Particle Size', and 'Product Temperature' in the 'Discharge Throat and Throat Plate' section. This data is critical to assess the needs for handling specific products.
10. In the 'Elevator Belt and Buckets' area, provide details on 'Head Pulley Diameter' and 'Head Pulley Face Width'.
11. Enter 'Head Shaft Diameter' and 'Head Shaft RPM' to complete the specifications for this section.
12. Specify the 'Motor Horsepower' in the 'Inspection Door' section to indicate the power requirements.
13. For the 'Boot Section', input 'Boot Pulley Diameter'.
14. Clarify the 'Feed Inlet' position (up or side) and its opening dimensions in the 'Up-Leg Inlet Hopper' section.
15. Complete the 'Bucket Elevator Manufacturer' and the required and current capacities in the 'Boot Shaft and Take-Up Bearing' section.
16. Finally, fill out the various dimensional specifications, including height, depth, and distances as required in the following sections.
17. After thoroughly filling out all sections, save your changes. You can then download, print, or share the completed form as needed.

Take action now to complete your Bucket Elevator Specification Form online.