Get U.s. Dod Form Dod-dd-1494-2 - U.s. Federal Forms

This guide provides step-by-step instructions for filling out the U.S. DOD Form DOD-D-1494-2 online. Users will learn how to accurately complete each section of the form to ensure proper equipment frequency allocation.

Follow the steps to fill out the DOD Form DOD-D-1494-2 online.

1. Press the ‘Get Form’ button to access the form online and open it in your preferred editor.
2. In Item 1, provide the nomenclature and manufacturer's model number. If unavailable, submit the manufacturer’s model number or a short descriptive title for the equipment.
3. In Item 2, enter the manufacturer's name if known. It must be filled out if an entry is made in Item 1.
4. For Item 3, specify the type(s) of vehicle(s), ship(s), plane(s), or building(s) where the transmitter will be installed.
5. Fill in Item 4 with the generic class of the transmitter, such as Frequency Scan or AM Communications.
6. Enter the tuning range in Item 5. Specify the frequency range or the specific frequency with indicated units (kHz, MHz, or GHz).
7. In Item 6, specify the method of tuning used, such as crystal or synthesizer. If tuning is complex, provide additional details in Item 24.
8. For Item 7, describe the RF channeling capability, including channel frequency and spacing, or continuous tuning specifications.
9. In Item 8, enter the appropriate emission designator(s), ensuring to include bandwidth for each as required.
10. Specify the frequency tolerance in Item 9, indicating units in parts per million (ppm) or Hertz (Hz) for applicable types.
11. Mark Item 10 to indicate if a filter is employed, and provide characteristics in Item 24 if applicable.
12. In Item 11, select whether a spread spectrum is used by marking the appropriate option.
13. Complete Item 12 with emission bandwidths at the specified dB levels and indicate if calculated or measured.
14. For Item 13, enter the maximum bit rate for the digital equipment in bits per second.
15. Specify modulation techniques and coding in Item 14, providing detailed descriptions if necessary.
16. In Item 15, clarify the maximum modulation frequency, ensuring to include the units of measure.
17. Mark Item 16 to indicate if pre-emphasis is available.
18. Complete Item 17 with the deviation ratio if applicable, following the specified formula.
19. For Item 18, provide pulse characteristics, including pulse rate, width, rise time, and fall time.
20. Enter power values in Item 19, documenting mean power or peak envelope power with appropriate units.
21. Describe the output device used in Item 20.
22. Record harmonic and spurious levels in Items 21 and 22.
23. Complete Item 23 with the FCC type acceptance number, if applicable.
24. Finally, review the form for accuracy and save changes. You can then download, print, or share the form as needed.

Begin filling out your DOD Form DOD-D-1494-2 online to ensure proper frequency allocation for your transmitter equipment.