Get Backflow Prevention Devise Test And Maintenance Form - Louisvilleky

Backflow can pose a public health risk if pollutants or contaminants such as chemicals enter the drinking water supply from your property. A backflow prevention device allows water to enter the property through the water meter, and prevents water from flowing back into the water supply network.

Backflow prevention systems are devices installed onto a pipe that only allow water to flow in one direction. Think of it as a one-way gate that allows water from the city's public water supply to flow into your home's piping but stops water if and when it ever tries to flow backwards into the main water supply.

To ensure the device is functioning properly, a certified backflow tester must test all backflow prevention devices annually.

The Manager shall inspect and approve all installations of the required backflow prevention devices. The costs for purchasing, installing, and maintaining a backflow prevention device shall be the responsibility and sole expense of the consumer. The consumer shall the backflow prevention device.

Reduced Pressure Principle Backflow Prevention Assembly (RP) An RP consists of inlet and outlet shut-off valves, four properly located test cocks, a first and second check valve component, and a relief valve component.

Check valves use a hinged plug that allows water to pass through the pipeline but blocks it from coming back. Backflow preventers, on the other hand, apply an increased amount of pressure on a pipe to ensure the water can only flow one way.

Common Issues Caused by a Damaged Backflow Preventer Water Leaks. Just like any other piece of equipment, backflow preventers will wear out over time, and as a result, it's not out of the ordinary for them to leak. ... Uneven Water Pressure. ... Cloudy or Discolored Water. ... Slow Drainage.